Table of Contents
Advertisement
Creating a Preset
GNX3000 Owner' s Manual
Adjust EQ/Tune the Cabinets
As an option, you may also want to modify each channel's EQ center frequencies
(Bass, Midrange, and Treble found in the TONE row) and adjust the resonance for
the British 1x12 and the British 4x12 Cabinets. To access the EQ center frequency
settings and Cabinet tuning, do the following:
1. Select the amp channel that you would like to edit by pressing either the CHAN
ONE EQ AMP CONTROL button or the CHAN TWO EQ AMP CONTROL button.
2. Press the STATUS button to turn the EQ on and off.
3. Rotate KNOB 1 to adjust the Cabinet Tuning resonance. The Cabinet Tuning
ranges are from
-12
4. Rotate KNOB 2 to select the Bass center frequency. The range is from 50 Hz
(
) to 300 Hz (
50 HZ
5. Rotate KNOB 3 to select the Midrange center frequency. The range is from 300
Hz (
) to 5000 Hz (
300 HZ
6. Rotate KNOB 4 to select the Treble center frequency. The range is from 500 Hz
(
) to 8000 Hz (
500 HZ
7. Rotate KNOB 5 boosts or cuts the Presence Level. The range is from -12 dB
(
) to +12 dB (
-12
12
1. Press either the Chan One EQ or
Chan Two EQ Amp Control button
3.-7. Rotate Parameter knobs to
84
.
(one octave below) to
0
).
300 HZ
).
5000 HZ
).
8000 HZ
).
2. Press the Status button to
turn the EQ on and off
adjust cabinet Tuning, EQ Center
Frequencies, and Presence Level
.
(one octave above).
12
0
Advertisement
Table of Contents
