Delay - DigiTech GNX3000 Owner's Manual

Guitar workstation
Hide thumbs Also See for GNX3000:
Table of Contents

Advertisement

Delay

Delay records a portion of the incoming signal, and plays it back a short time later.
The recorded segment can repeat just once, several times, or infinitely (that turns off
the input to the Delay and lets you play over the top of a passage in the Delay loop).
The Delay in the GNX3000 also includes a Ducker Threshold that lets you set the
signal strength required before the Delay records. This feature lets you control the
Delay with your playing.
Delay On/Off
The STATUS button turns the Delay (
Delay Type
KNOB 1 selects one of the five different types of Delay. The Delay choices include:
(clear concise repeats),
MONO
(deteriorates with each repeat),
(clear concise repeats with stereo imaging)
Spread
Time
KNOB 2 adjusts the length of time between repeats. Ranges from 0 through 2000
milliseconds (2 seconds) (
the DATA WHEEL while the Delay Time appears in the Display to adjust the Delay
Time in 100 ms increments.
Feedback
KNOB 3 adjusts the number of times the delayed signal will repeat (feedback).
Ranges from 0 to 99 and
Ducker Threshold
KNOB 4 adjusts the level (
Delay signal is attenuated. Ranges from
*Ducker Attenuation
The Ducker Level selects the amount of attenuation applied to the Delay signal
when the Ducker Threshold has been exceeded. Ranges from 0 to 99.
*Delay Balance
The Delay Balance adjusts the left/right balance of the Delay signal. Ranges from
to
dly left 99
Spread
This parameter increases or decreases the stereo imaging for the Spread Delay.
Range is
to
.
1
30
Delay Level
KNOB 5 adjusts the volume (
99.
*These Parameters are only available using the X-Edit
delay
(bounces from side to side),
pingpong
anlgpong
through
0 MS
2000 MS
(infinite repeat).
rpt hold
) the input signal must reach before the
threshld
to
1
.
dly rght 99
) of the Delay signal. Ranges from 0 to
dly levl
) on and off.
(side to side with deterioration),
) in 1 ms increments. Use
and off (
).
99
oF
TM
Editor/Librarian software.
GNX3000 Owner' s Manual
ANALOG
73
GNX3000 Owner' s Manual

Advertisement

Table of Contents
loading

Table of Contents