Gnx3000 Matrix Functions; The Gnx3000 Matrix - DigiTech GNX3000 Owner's Manual

GNX3000 Matrix Functions

AMP/CABINET
SECTION
Effect Select
GNX3000 Owner' s Manual
GNX3000 Matrix Functions

The GNX3000 Matrix

Amp Control
Buttons
Status Button
Buttons
EFFECTS
SECTION
The main panel of the GNX3000 is the Matrix. The Matrix is comprised of two main
sections, AMP/CABINET and EFFECTS. It is used to navigate through the GNX3000's
amp/cabinet modeling and effects parameters. Upon power up, the GNX3000 defaults
to the TONE row in the AMP/CABINET section and any effects that are enabled within
a preset will have their corresponding LEDs lit in the EFFECTS section of the Matrix.
You can select one of the other three Amp Control rows, CHAN 1 EQ, GENETX, or
CHAN 2 EQ using the AMP CONTROL buttons or you can select the different effects
and their parameters using the EFFECT SELECT buttons. The LED to the left of each
row indicates which row is active, while the STATUS button and five KNOBS control the
corresponding parameter above or below each knob.
38
NAME 64
Knobs