Tone Row - DigiTech GNX3000 Owner's Manual

TONE Row

KNOB
STATUS
1
BUTTON
The TONE row is where the amp tone controls are located for Channel 1 or Channel 2.
The sound that you hear while adjusting these parameters will depend on the channel
status (see chart below). TONE control row parameters are Channel, Amp Gain, Bass,
Midrange, Treble, and Amp Level.
Status button
Selects one of the four channel states in the following order:
- The STATUS button LED lights green and the five control knobs
Ch1 amp
light green indicating that you are listening to Channel 1 and the
control knobs affect Channel 1's tone settings.
- The STATUS button LED lights yellow and the five control knobs
Ch1 warp
light green indicating that you are listening to a warped sound
and the control knobs affect Channel 1's tone settings.
- The STATUS button LED lights red and the five control knobs
Ch2 amp
light red indicating that you are listening to Channel 2 and the
control knobs affect Channel 2's tone settings.
Ch2 warp - The STATUS button LED lights yellow and the five control knobs
light red indicating that you are listening to a warped sound and
the control knobs affect Channel 2's tone settings.
Knob 1
Controls the amount of Amp Gain. The Amp Gain range is from 0 to 99.
Knob 2
Controls the Bass EQ Level (boost/cut). The Bass EQ Level range is from -12dB
( ) to 12dB ( ).
-12 12
Knob 3
Controls the Midrange EQ Level (boost/cut). The Midrange EQ Level range is
from -12dB ( ) to 12dB (
-12
Knob 4
Selects the Treble EQ Level (boost/cut). The Treble EQ Level range is from -
12dB ( ) to 12dB (
-12
Knob 5
Controls the Amp Level. The Amp Level Range is from 0 to 99.
TONE ROW
KNOB KNOB KNOB KNOB
2 3 4 5
).
12
).
12
GNX3000 Owner' s Manual
43
GNX3000 Owner' s Manual