Noise Gate - DigiTech GNX3000 Owner's Manual

Effects and Parameters
GNX3000 Owner' s Manual

Noise Gate

A Noise Gate is designed to eliminate hiss and ambient noise while you are not
playing. A Noise Gate can also be used to create an automatic swell in volume.
The GNX3000 includes two different types of Noise Gates: Silencer and Pluck. The
Silencer operates as a standard Noise Gate. The Pluck feature is designed to close
after every note (depending on the Pluck Sensitivity). This allows automatic volume
swells to occur on a note by note basis.
Gate On/Off
The STATUS button turns the Noise Gate (
Gate Type
KNOB 1 selects between the Silencer (
Noise Gates.
Gate Threshold
KNOB 2 sets the signal strength required to open or close the Noise Gate. The
Gate Threshold (
Threshld
(requires strong signals to open).
Gate Attack
KNOB 3 adjusts the length of time it takes the gate to open (
signal to become audible once the Threshold has been exceeded. Ranges from
(immediate signal), to
Pluck Sensitivity
KNOB 4 selects the threshold (
the Pluck type Noise Gate. This parameter is only available when Pluck is the
selected type of Noise Gate. Ranges from
triggers with weak signals).
Knob 5
No function when the Noise Gate is selected.
60
gate
Silencer
) parameter ranges from
(This setting will gradually ramp up the volume).
9
) where the Gate re-triggers when using
PLUCKSNS
(requires strong signals) to
0
) on and off.
) or Pluck ( ) type of
PLUCK
(opens easily) to
0
) and the
ATTACK
99
0
(re-
99