Effects and Parameters
GNX3000 Owner' s Manual
Phaser
A Phaser splits the incoming signal, takes the split signal in and out of phase and
mixes it back in with the original signal. As the phasing changes, different frequencies
are canceled resulting in a warm sort of twisting sound.
Parameter 1
KNOB 2 adjusts the rate (
Parameter 2
KNOB 3 adjusts the intensity (
Parameter 3
KNOB 4 adjusts the amount of effected signal returned to the input of the Phaser
(
). Ranges from 0 to 99.
Regen
*Parameter 4
Selects the waveform used by the Phaser. Waveforms include:
, and
Sine
Square
*Parameter 5
Adjusts the left to right balance of the wet signal, Ranges from
to
.
mod rght 99
Mod Level
KNOB 5 controls the level (
dry) to
(all wet).
99
*These Parameters are only available using the X-Edit
64
) of the modulating phase. Ranges from 0 to 99.
Speed
) of the modulation. Ranges from 0 to 99.
Depth
.
) of wet and dry signal. Ranges from
mod levl
,
Triangle
mod left 99
Editor/Librarian software.
TM
(all
0