Mic And Line Setups - DigiTech GNX3000 Owner's Manual

Mic and Line Setups

You can configure the MIC and LINE INPUTS routing for live performance and
recording applications. The GNX3000 acts as a mixing device for MIC and LINE
INPUTS, and can eliminate the need for a mixer when the outputs are to be plugged
directly into a full-range powered speaker system. When enabled, these inputs can be
routed around or through some or all of the effects processing and then mixed directly
into the GNX3000's 1/4" and XLR OUTPUTS.
Use the SHIFT>MIC and SHIFT>LINE buttons along with the DATA WHEEL to select the
Mic/Line Setup options.
Both MIC and LINE INPUTS have four settings that can be independently selected.
They are as follows:
MIC and LINE INPUTS are disabled.
MIC OFF/LINE OFF -
MIC and LINE INPUTS are routed directly to GNX3000's outputs,
MIC DRY/LINe DRY -
bypassing all effects processing.
MIC RVB/LINe RVB - MIC and LINE INPUTS are routed through delay and reverb effects
of the current preset.
MIC and LINE INPUTS are routed through all effects of the current
MIC FX/LINE FX -
preset.
For more information about how these settings are routed, refer to the charts on pages
21 through 23.
Mic Line
Button Button
Shift
Button
GNX3000 Owner' s Manual GNX3000 Owner' s Manual
25 25
GNX3000 Owner' s Manual GNX3000 Owner' s Manual