Storing/Copying A Preset; Storing A Preset - DigiTech GNX3000 Owner's Manual

Storing/Copying a Preset

GNX3000 Owner' s Manual
Storing/Copying a Preset

Storing a Preset

Once you have modified the Amp Models, Cabinet Types, and Effect Parameters, the
Store button LED flashes indicating you have changed a parameter and need to store
the changes to a User Preset location in order to recall them later. The following steps
outline the procedure for storing a preset:
1. Press the STORE button. The first letter of the preset name begins flashing.
2. Use the DATA WHEEL to select the alpha-numeric character.
3. Press the NEXT button to select the next character to the right, and the PREV
button to select the previous character to the left.
Name
4. Repeat steps 2 and 3 until you are finished naming the new preset.
5. Press the STORE button again. The current preset location will then flash in the
red display.
6. Select the User Preset location using the DATA WHEEL.
7. Press the STORE button again to finish.
number
92
2. Use the Data Wheel to select
an alpha-numeric character
64
3. Use the Next button to
select the next character
64
6. Select a User
preset using the
Data Wheel
1. Press Store
5. Press Store again
7. Press Store again