Store the Preset
The last step is to store our changes to a User Preset. If we changed presets
or turned the GNX3000 off without storing these settings, it would forget what
we had done and revert back to the original preset. To store the preset, do the
following:
1. Press the STORE button. The first letter in the display begins to flash. Since this
is an example preset, let's name the preset
2. Rotate the DATA WHEEL until the flashing character in the display is an E.
3. Press the NEXT button once and the second character begins to flash.
4. Rotate the DATA WHEEL again until the flashing character is an
using the NEXT button to select the character location and the DATA WHEEL to
change the characters.
3. Use the Next arrow button to
select character locations
store
5. Once the Display reads
in the red numeric display are flashing.
6. Rotate the DATA WHEEL to select User Preset 48 as the destination.
7. Press the STORE button once more to save the preset.
Congratulations! You have successfully created a Preset.
examplE
2., 4., 6. Use the Data Wheel to
change characters
, press the STORE button again. The numbers
exampLE
.
. Continue
X
1., 5., 7. Press the Store
button
91
GNX3000 Owner' s Manual
GNX3000 Owner' s Manual