Table of Contents
Advertisement
GNX3000 Matrix Functions
GNX3000 Owner' s Manual
Here is an example of how the CHAN ONE EQ row would function when its button is
pressed:
Warped Amp Sound being heard:
If the sound being heard is a Warped sound of both amp models, pressing the CHAN
ONE EQ button selects the knobs to control the CHAN ONE EQ's row of parameters.
The STATUS button LED will light yellow, indicating a Warped sound is being heard,
and the knobs will all light green. You can modify the CHAN ONE EQ row parameters
which will be heard as the knobs are turned. The STATUS button will turn the CHAN
ONE EQ on or off and indicate this status by turning the button LED on and off.
CHAN ONE amp sound being heard:
If the sound being heard is the CHAN ONE amp tone, pressing the CHAN ONE EQ
button selects the knobs to control CHAN ONE EQ's row of parameters. The STATUS
button and the knobs will light green. You can modify the CHAN ONE EQ row
parameters, which can be heard as the knobs are turned. The STATUS button will turn
the CHAN ONE EQ on or off and indicate this status by turning the button LED on and
off.
CHAN TWO amp sound being heard:
If the sound being heard is the CHAN TWO amp tone, pressing the CHAN ONE EQ
button selects the knobs to control the CHAN ONE EQ's row of parameters. The
STATUS button will be lit red indicating you are still listening to the CHAN TWO amp
tone. The knobs however will be lit green and once any of them are turned, the sound
will change from the CHAN TWO amp tone to the CHAN ONE amp tone. You can then
modify the CHAN ONE EQ parameters and these changes can be heard as the knobs
are turned. The STATUS button will also turn green at this time and can be used to
turn the CHAN ONE EQ on or off as will be indicated by the button's LED turning on
and off.
42
Advertisement
Table of Contents
