Tune The Cabinets (Optional); Warp The Green And Red Channels Together; Save The Hypermodel - DigiTech GNX2 User Manual

Tune the Cabinets (optional)

You may also want to adjust the resonance for the American 2x12 and the British 4x12 Cabinets. To
access the Cabinet tuning for both Red and Green Channels, press and hold the STATUS button until
CAB TUNe
the display reads
to adjust the tuning for the Green Cabinet (
rtune º0
the Red Cabinet (
button to return to Performance mode.

Warp the Green and Red Channels Together

When the Amps and Cabinets in our Green and Red Channels are dialed in to suit our taste, we can
Warp their characteristics together to create a new HyperModel™. Make sure your GNX2 is in yellow
mode (indicated by the yellow lit Status LED). If it is not in yellow mode, press the Status button until the
Status LED turns yellow. Then rotate the Number 3 (Warp) knob to blend the Amps and Cabinets in our
Green and Red Channels.

Save the HyperModel™

Now that we have designed our own Amp/Cabinet HyperModel™, we need to save it to one of the 9
User HyperModel™ locations. This allows us to use it in presets. Press the AMP SAVE button until
the display reads NEW AMP
HyperModel™ "Rectweed" (Rectified Tweed). Rotate the DATA WHEEL to select R as the first letter.
Then press the RHYTHM button to select the next character in the display. Continue using the Data
Wheel and Rhythm button until the display reads
When the display reads
the 9 User HyperModel™ locations.The alpha-numeric display should read
numeric display should read
SAVE button again to save to this Amp location.The display briefly reads
then returns to the name of the selected preset.
(Cabinet Tuning). Release the Status button and rotate the Number 2 knob
gtune º0
). Once the tuning of both Cabinets has been adjusted, press the STATUS
and the first letter (
RECTWeeD , press the AMP SAVE button again. Now we need to choose one of
U1
if this is the first HyperModel™ stored to your GNX2. Press the AMP
) and the Number 5 knob to adjust the tuning for
N ) is flashing. For this example, let's name the
RECTWeeD
.
Tutorial
EMPTY
(Empty) and the red
AMP SaVD
(Amp Saved) and
31