Hooking It Up; Live Performance Setups; Small Club Setup (Mono Amp Rig) - DigiTech GNX3000 Owner's Manual

Hooking It Up

Live Performance Setups

The GNX3000 was designed to be extremely flexible to meet any of your application
needs. For many GNX3000 users, its primary purpose will be for use in live
performances. The following diagrams show examples of how to utilize the GNX3000
in typical live performance applications.
NOTE: Before making connections to the GNX3000, make sure both the GNX3000
and your amplifier(s) are turned OFF.

Small Club Setup (Mono Amp Rig)

This diagram demonstrates a minimum setup for using the GNX3000 in a typical, small
club performance setup. All you need is your guitar, two guitar cables, and an amp. This
connection scheme also applies for use with a power amp/speaker cabinet rig.
Guitar Input
1. Connect your guitar to the GNX3000's GUITAR INPUT.
2. Connect a single mono instrument cable from the LEFT 1/4" BALANCED OUTPUT
of the GNX3000 to the instrument input or the effect return on your amplifier.
3. Press the GNX3000's OUTPUT SETUP button and select "MONO
the DATA WHEEL.
4. Turn OFF Speaker Compensation for the 1/4" BALANCED OUTPUTS in the 1/4"
Speaker Compensation menu (described on page 24).
NOTE: When connecting the GNX3000 to a guitar amp(s), it may be best to connect
the GNX3000's Output to your amp's effects return to avoid coloration of the tone
due to the amplifier's tone controls.
Left 1/4" Balanced Output
GNX3000 Owner' s Manual GNX3000 Owner' s Manual
Amplifier
" mode using
1/4
27 27
GNX3000 Owner' s Manual GNX3000 Owner' s Manual