DigiTech GNX3000 Owner's Manual page 26

Guitar workstation
Hide thumbs Also See for GNX3000:
Table of Contents

Advertisement

Getting Familiar with the GNX3000
GNX3000 Owner' s Manual
GNX3000 Owner' s Manual
8. Left/Right XLR Balanced Outputs
Connect these outputs to your power amplifier/speaker system or to a mixing
console that accepts XLR balanced connections. DigiTech
do not connect these GNX3000 XLR outputs to mixer or console channels that
have phantom power enabled.
9. Headphone Output
Connect a pair of stereo headphones to this jack. DO NOT connect a mono plug to
this jack, as it may damage the output driver.
10. Footswitch
(OPTIONAL ) Connect a GNXFC footswitch to this jack for remote control of the
GNX3000's record functions.
11. USB Jack
Connect this jack to your computer's USB port for hard disk recording and
computer preset editing via the X-Edit
USB cable is included. The GNX3000 is compatible with USB 2.0 high speed ports,
however the USB 2.0 bus will switch to a USB v1.1 full speed (up to 12 Mbps) data
rate to work with the GNX3000.
ATTENTION: Refer to the "Installing the GNX3000's Software Suite" section on page
101 before connecting the GNX3000 to the USB port on your PC and using Pro Tracks
Plus.
12. MIDI In
The MIDI In jack receives all incoming MIDI data including MIDI preset
changes. MIDI preset changes and CC control messages received from external
MIDI devices connected to the MIDI In jack can be used to control the GNX3000
and its preset parameters. When the GNX3000 is connected to the computer
via USB, the MIDI In can be used as a MIDI interface for recording any MIDI
data in Pro Tracks Plus
MIDI CC table.)
13. MIDI Out/Thru
The MIDI Out/Thru jack sends MIDI data from the GNX3000 MIDI preset
changes. When the GNX3000 is connected to the computer via USB, it can act as
a MIDI interface for sending MIDI data from Pro Tracks Plus
recording software to external keyboards or sound modules. When MIDI Merge
is enabled in the Utility menu, the MIDI Out acts as a MIDI Thru for any data
coming into the GNX3000 from the MIDI In jack. (See page 129 for the MIDI CC
table.)
18
18
Editor/Librarian software. A standard
or other MIDI recording software. (See page 129 for the
recommends that you
®
or other MIDI

Advertisement

Table of Contents
loading

Table of Contents