Configuring Profile Settings - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Updating Configuration Files
Table 6-2 Configuration File Settings
Setting
USB Settings
Trace Settings
Wavelink Settings
To update settings in the phone configuration file, follow these steps:
Procedure
Right click 7925CU (in a folder under Software Collections) to launch the CU.
Step 1
From the left pane, choose the settings you wish to configure: Profile Settings, USB Settings, Trace
Step 2
Settings, or Wavelink Settings.
From the settings page, select or enter information for those settings.
Step 3
Click Apply.
Step 4

Configuring Profile Settings

Table 6-3
See also
Note
Web Pages
Table 6-3 Profile Settings
Item
Profile Name
Profile Enabled
WLAN Settings
SSID
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
6-6
lists the profile settings.
Network Profile Settings, page
chapter.
Description
Provides a name for the profile to make it easy to identify; up
to 63 alphanumeric characters.
Choose Yes or No.
Assigns the Service Set Identifier (SSID) to this profile. You
must assign the same SSID to the phone that is also assigned to
access points in the wireless network.
Chapter 6 Configuring the Phone Using the Wavelink Avalanche Server
For more information, see...
Configuring USB Settings, page 6-9
Configuring Trace Settings, page 6-9
Configuring Wavelink Settings, page 6-10
4-8, in the Using the Cisco Unified Wireless IP Phone 7925G
For More Information, See...
OL-15984-01