Changing Phone Settings - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Changing Phone Settings

Table 5-3 WLAN Configuration Settings (continued)
Network Setting
Password
802.11 Mode
Call Power Save Mode
Scan Mode
Related Topics
•
•
•
•
Changing Phone Settings
The Phone Settings menu enables configuration of individual phones with ring tones or volume levels,
display settings, keypad settings, and home page settings.
You can control whether a Cisco Unified Wireless IP Phone 7925G has access to the Phone Settings
Note
menu from the Cisco Unified Communications Manager Administration Phone Configuration page. Use
the Settings Access field in the Product Specific Configuration section of the phone configuration page.
For more information, see the
IP Phone 7925G" section on page
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
5-10
Description
Password for the wireless network (up to 32 characters)
The wireless signal standard used in the WLAN. Options
are:
802.11b/g
•
802.11a
•
Auto-b/g
•
Auto-a
•
Auto-RSSI
•
The type of power saving mode used in the WLAN.
Options are:
• U-APSD/PS-Poll
None
•
Auto—Scans when on a call or when the strength signal
(RSSI) is low.
Continuous—Scans continuously even when it is not in
a call.
Single AP—Never scans except when the basic service
set (BSS) is lost.
Accessing Network and Phone Settings, page 5-1
Configuring Network Profile Settings, page 5-2
Configuring the Security Certificate on the Phone, page 5-12
Changing Phone Settings, page 5-10
Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone 7925G
"Specific Configuration Options for the Cisco Unified Wireless
7-13.
For More Information, See...
Configuring the Username and
Password, page 4-15
802.11 Standards for WLAN
Communications, page 2-3
Networking Protocols Used with
Cisco Unified Wireless IP Phones,
page 2-9
Wireless Network Requirements
for VoIP, page 2-21
OL-15984-01