Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual page 104

Configuring Trace Settings
Step 7 Click Save to make the change.
Table 4-8
Item
General
Number of Files
File Size
Remote Syslog Server
Enable Remote Syslog
Module Trace Level
Kernel
Wireless LAN Driver
Wireless LAN Manager
Configuration
Call Control
Network Services
Security Subsystem
User Interface
Wireless
Audio System
System
Advanced Trace Settings
Preserve Logs
Reset Trace Settings upon
Reboot
Related Topics
• Accessing the Phone Web Page, page 4-3
Configuring Network Profiles, page 4-8
•
Configuring USB Settings, page 4-26
•
Using System Settings, page 4-34
•
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-28
Trace Settings Area Items
Description
Choose the number of trace files that the phone saves, from 2-10 files.
Choose the File size for the trace file that is saved. The file size range
is 50K to 250K.
Set up a remote server to store trace logs
IP Address—Enter server IP address
Port—Enter a port number (514, 1024-65535)
Operating System data
Channel scanning and authentication
Channel scanning and authentication
Phone configuration data
Cisco Unified Communications Manager data
DHCP, TFTP, CDP data
Application level security data
Key strokes, softkeys, MMI data
Channel scanning, authentication data
RTP, SRTP, RTCP, DSP data
Firmware, upgrade data
True—Save trace logs after powering off the phone
False—Delete trace logs
You may enable debugging by configuring various settings on the
Trace Configuration. These options determine how trace settings are
handled when you reboot:
• Yes—Default value. Settings will be reset to the default values
upon reboot.
No—Trace settings will not reset upon reboot.
•
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
OL-15984-01