Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual page 221

Appendix A Providing Information to Users By Using a Website
Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.
For information about setting up the MWI method and the interface to the voice messaging system in
Cisco Unified Communications Manager, refer to the documentation for your system at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/tsd_products_support_series_home.html
If you are using a Cisco Unity voice messaging system, refer to the Cisco Unity documentation for your
system for configuring voice messaging and the initial passwords at this URL:
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/tsd_products_support_series_home.html
Refer to the Cisco Unified Wireless IP Phone7925G Guide for information about accessing the voice
messaging system from the phone at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/products_user_guide_book09186a008076b8a
f.html
Related Topics
• How the Cisco Unified Wireless IP Phone Operates, page A-1
• How to Care for and Clean the Phone, page A-2
• How Users Access the Help System on the Phone, page A-3
How Users Get Copies of Cisco Unified IP Phone Manuals, page A-3
•
How Users Configure Phone Features and Services, page A-4
•
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
How Users Access Voice Messages
A-5