Using System Settings
Table 4-11
Field
BSS Lost Count
Channel Utilization
Station Count
Available Admission Capacity
Basic Rates
Optional Rates
Multicast Cipher and Unicast
Cipher
AKM
Proxy ARP Supported
WMM Supported
CCX Version Number
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-40
AP Details Report (continued)
Description
When a sweep does not discover an AP, the last best AP is flagged
with a BSS lost count.
The percentage of time, normalized to 255, in which the AP sensed
the medium was busy, as indicated by the physical or virtual carrier
sense (CS) mechanism.
Total number of spanning tree algorithms (STAs) currently
associated with this BSS.
An unsigned integer that specifies the remaining amount of medium
time available through explicit admission control, in units of 32
µs/s.
Data rates required by the AP at which the station must be capable
of operating.
Data rates supported by the AP that are optional for the station to
operate at.
For Multicast Cipher, one of the following; for Unicast Cipher, one
or more of the following:
None
•
WEP40
•
WEP104
•
TKIP
•
CCMP
•
CKIP CMIC
•
CKIP
•
CMIC
•
One or more of the following:
WPA1_1X
•
WPA_PSK
•
WPA2_1X
•
WPA2_PSK
•
WPA1_CCKM
•
WPA2_CCKM
•
CCX compliant AP supports responding to IP ARP requests on
behalf of the associated station. This feature is critical to standby
time on the wireless IP phone.
Support for WiFi Multi-Media Extensions.
Version of CCX if the AP is CCX compliant.
Chapter 4
Using the Cisco Unified Wireless IP Phone 7925G Web Pages
OL-15984-01