How to Use the Cisco 7920 Configuration Utility
Exporting Settings
Changing to Another Phone
Configuring the Phone Settings
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 3.3 or Later
4-20
Click the Export button to update the settings or firmware image of a
Cisco Wireless IP Phone 7920 connected through a USB port. You need to save
the modified settings before you can export them to the Cisco Wireless IP
Phone 7920.
Only the administrator can use the Change Phone button in the Phone Preference
window and change to another phone without having to log in again.
Click the Unplug or Eject Hardware icon (
the Cisco Wireless IP 7920 Phone, and then disconnect and change to another
phone.
Related Topics
Using the Cisco 7920 Configuration Utility, page 4-15
•
•
Using the Settings Wizard, page 4-16
Configuring the Phone Settings, page 4-20
•
You can use the Phone Preference window tabs near the top of the window to
perform the following tasks:
•
Setting System Parameters
Configuring RF Network Settings
•
•
Setting Network Security
Configuring Phone Settings
•
Setting the Phone Lock Password
•
Chapter 4
Using the Cisco 7920 Configuration Utility
) on the Windows status bar to stop
OL-3930-02