Updating Configuration Files - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Chapter 6 Configuring the Phone Using the Wavelink Avalanche Server
To install the phone CU, follow these steps:
Procedure
Launch the Wavelink Avalanche Management Console and connect to the agent.
Step 1
Choose Software Management > Install Software Package.
Step 2
Browse to the location of the .ava file containing the Cisco Unified Wireless IP Phone CU and select it.
Step 3
Click New and enter the software collection name under which the phone configuration files will be
Step 4
added.
Follow the instructions on the wizard to complete the installation.
Step 5
When the installation has completed, expand the software collection name on the left pane. The phone
Step 6
CU file name 7925CU appears with a red "x" (disabled) next to it.
Right-click 7925CU and choose Enable Package.
Step 7
Note
Right-click the software collection (containing the phone CU) and choose Settings.
Step 8
Click the button at right of the Selection Criteria box to launch the Selection Criteria Wizard.
Step 9
Select an item from the Source Properties list on the left, and enter a value in the Selection Expression
Step 10
text box.
Repeat the previous step for each property and value you wish to include. When finished, click Compile,
Step 11
then click Test Expression.
Review the list displayed under Matching Clients to ensure the selection criteria have been met. Click
Step 12
Apply, then click OK.
For more information, see the Wavelink Avalanche Management Console documentation.
Note

Updating Configuration Files

You can update a phone configuration file using the Cisco Unified Wireless IP Phone 7925G CU
installed on a Wavelink Avalanche Management Console.
Table 6-2
Table 6-2 Configuration File Settings
Setting
Profile Settings
WLAN Settings
Network Settings
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
The installation is complete. As an option, you can perform the following additional steps to
configure the selection criteria so you can easily apply changes to a device group.
lists the configuration file settings.
For more information, see...
Configuring Profile Settings, page 6-6
Updating Configuration Files
6-5