Configuring The Authentication Mode - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Configuring Network Profiles
Table 4-5
Authentication Mode
LEAP (with optional CCKM)
EAP-FAST (with optional CCKM) Uses WEP or TKIP
EAP-TLS
PEAP
Auto (AKM) with CCKM
Auto (AKM) with WPA (with
optional CCKM)
Auto (AKM) with WPA2 (with
optional CCKM)
Auto (AKM) with WPA Pre-Shared
Key
Auto (AKM) with WPA2
Pre-Shared Key
Note Beginning with Cisco Wireless IP Phone 7925G firmware release 1.1, CCKM is operational with the
WPA authentication mode using AES encryption.

Configuring the Authentication Mode

To select the Authentication Mode for this profile, follow these steps:
Procedure
Choose the network profile that you want to configure.
Step 1
Choose the authentication mode.
Step 2
Note
Click Save to make the change.
Step 3
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-14
Authentication and Encryption Configuration Options (continued)
Depending on what you selected, you must configure additional options in Wireless Security or
Wireless Encryption. See
Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
Wireless Encryption
Uses WEP
Uses WEP, TKIP, or AES
Uses WEP, TKIP, or AES
Uses TKIP or AES
Uses TKIP
Uses AES
Uses TKIP
Uses AES
Table 4-5 for more information.
Wireless Security Credentials
Requires Username and Password
Requires Username and Password
Requires Username and Password
Requires server and client
certificates.
Requires Username and Password
Requires server side certificate.
Requires Username and Password
Requires Username and Password
Requires Username and Password
Requires Passphrase
Requires Passphrase
OL-15984-01