Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual page 55

Chapter 2 Overview of the VoIP Wireless Network
Step 4 To verify the ability to roam between APs, walk through all areas where phones are used and take
readings. Approach areas from different directions to assure successful roaming conditions.
Step 5 Adjust AP and antenna placement and AP power settings to provide approximately 20 percent coverage
overlap.
Step 6 When you terminate the site survey, a report is generated for your viewing from the phone web page.
For more information, see
In addition to the Site Survey utility in the Cisco Unified Wireless IP Phone 7925G, you can also use the
Cisco Aironet Client Utility Site Survey Utility from a laptop PC. Refer to the section on "Performing a
Site Survey" in the
for your system.
Related Topics
Performing a Site Survey Verification, page 2-23
•
• Viewing the Site Survey Report on the Web, page 4-38
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
Viewing the Site Survey Report on the Web, page
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide
Site Survey Verification
4-38.
2-25