Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual page 82

For cisco unified communications manager 7.0(1)
Hide thumbs Also See for 7925G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Updating the Phones Remotely
Step 9
Return to the Phone Configuration page in Cisco Unified Communications Manager Administration and
set the Web Access field back to Read Only or Disabled.
Step 10
Reset the phone from Cisco Unified Communications Manager to disable full access to the web pages.
Be sure to change the Web Access privileges and reset the phone to prevent users from making
configuration changes on the phone web pages.
If a wireless IP phone was previously registered to Cisco Unified CallManager Administration Release
Note
4.x, and you try to register to Cisco Unified Communications Manager Administration 5.x, 6.0(1),
7.0(1), the Phone Configuration web page password might be set to "Cisco."
Table 4-1
Menu
Setup
Network Profiles
USB Settings
Trace Settings
Wavelink Settings
Certificates
Configurations
Phone Book
Information
Network
Wireless LAN
Device
Statistics
Wireless LAN
Network
Stream Statistics
Stream 1
Stream 2
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-6
Home Web Page Menus
Related Information
Configuring Network Profiles, page 4-8
Configuring USB Settings, page 4-26
Configuring Trace Settings, page 4-27
Configuring Wavelink Settings, page 4-29
Configuring Wireless LAN Security, page 4-13
Configuring the Phone Book, page 4-29
Summary Information on the Home Web Page, page 4-7
Displays Rx and Tx statistics.
Displays IP, TCP, and UDP statistics.
Displays RTP statistics and voice quality metrics.
Chapter 4
Using the Cisco Unified Wireless IP Phone 7925G Web Pages
OL-15984-01

Advertisement

Table of Contents
loading

Table of Contents