Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual page 147

Chapter 7 Configuring Features, Templates, Services, and Users
Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7925G (continued)
Feature Description
Barge Allows a user to join a non-private call on a shared phone
line. Barge features include cBarge, Barge, and Single
Button Barge.
• cBarge adds a user to a call and converts it into a
conference, allowing the user and other parties to
access conference features.
Barge adds a user to a call but does not convert the call
•
into a conference.
Single Button Barge enables users to Barge or cBarge
•
into a remote-in-use call on a shared line.
The phones support Barge in two conference modes:
Built-in conference bridge at the target device (the
•
phone that is being barged). This mode uses the Barge
softkey.
Shared conference bridge. This mode uses the cBarge
•
softkey.
Note
Block external to Prevents users from transferring an external call to another
external transfer external number.
Busy Lamp Field Allows a user to monitor the call state of a directory
(BLF) speed dial number (DN) associated with a speed-dial button. The
available states are: alerting, idle, busy, and DND. During
the alerting state, call pickup capability is enabled.
Note
Call Back Provides users with an audio and visual alert on the phone
when a busy or unavailable party becomes available.
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
The Barge and Privacy features work together. See
Privacy, page 7-11 for more information.
This feature is not supported in Cisco Unified
Communications Manager Release 4.x.
Telephony Features Available for the Phone
Configuration Reference
For more information, refer to:
Cisco Unified Communications
•
Manager Administration Guide,
"Device Pool Configuration" chapter.
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phones" chapter.
• Cisco Unified Communications
Manager Features and Services
Guide, "Barge and Privacy" chapter.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide, "External
Call Transfer Restrictions" chapter.
For more information, refer to Cisco
Unified Communications Manager
Features and Services Guide, "Presence"
chapter.
For more information, refer to:
Cisco Unified Communications
•
Manager System Guide, "Cisco
Unified IP Phones" chapter.
Cisco Unified Communications
•
Manager Features and Services
Guide, "Call Back" chapter.
7-3