C H A P T E R 3 Setting Up The Cisco Unified Wireless Ip Phone 7925G; Methods For Adding Phones To Cisco Unified Communications Manager - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Before You Begin
VoIP Network
•
•
•
Related Topics
•
•
•
•
•

Methods for Adding Phones to Cisco Unified Communications Manager

Before installing the wireless IP phone, you must choose a method for adding phones to the
Cisco Unified Communications Manager database. Some methods require entering the MAC address of
the phone.
Table 3-1
Method
Auto-registration
Auto-registration with the Tool for
Auto-Registered Phones Support
(TAPS)
BAT
Cisco Unified Communications
Manager Administration only
The following sections describe methods for adding phones:
•
•
•
•
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
3-2
Cisco routers and gateways configured for VoIP
One of these call–control products installed and configured:
Cisco Unified Communications Manager Release 4.3, 5.1, 6.0(1), 6.1(1), or 7.0(1)
–
Cisco Unified Communications Manager Express 4.3 or later
–
IP network configured to support DHCP or manual assignment of IP address, gateway, and subnet
mask
Features Supported on the Cisco Unified Wireless IP Phone 7925G, page 1-6
Understanding the Wireless LAN, page 2-1
Methods for Adding Phones to Cisco Unified Communications Manager, page 3-2
Installing the Cisco Unified Wireless IP Phone 7925G, page 3-7
Powering On the Cisco Unified Wireless IP Phone 7925G, page 3-15
Table 3-1 provides an overview of these methods.
Methods for Adding Phones to the Cisco Unified Communications Manager
Database
Adding Phones with Auto-Registration, page 3-3
Adding Phones with Auto-Registration and TAPS, page 3-3
Adding Phones with BAT, page 3-4
Adding Phones with Cisco Unified Communications Manager Administration, page 3-4
Chapter 3 Setting Up the Cisco Unified Wireless IP Phone 7925G
Requires MAC
Address? Notes
No Results in automatic assignment of
directory numbers
No Requires auto-registration and Bulk
Administration Tool (BAT); updates
information in the Cisco Unified IP
Phone and in Cisco
Unified Communications Manager
Administration
Yes Allows for simultaneous registration of
multiple phones
Yes Requires phones to be added
individually
OL-15984-01