Configuring Call Settings; Speed Dials; Call Preferences - Cisco SPA302D User Manual

4.0 Configuring Call Settings

To reach the Call Settings menu, press the centre Select button, scroll to Call Settings, and press the centre
Select button again.
In the Call Settings menu, press the up and down arrow buttons to select the settings you want to change and
press the Select button. Available configuration options are described in the following sections.

4.1 Speed Dials

You can configure up to 9 speed dials (numbers 2 through 9 and 0) on your handset. A speed dial number can be
configured by pressing and holding an unassigned number on the keypad, or by using the Call Settings menu on
the handset.

4.2 Call Preferences


Do Not Disturb: Incoming calls do not reach the handset and they will not display in the Received Calls list. If
more than one handset is connected to the base station and the DND is enabled then all the handsets are
synchronised and will not accept calls.

Call Waiting: If call waiting is enabled, while on a call, a beep tone will alert you of a second incoming call.

Block Caller ID: Prevents your Caller ID information from being sent when placing a call.

Block Anonymous Call: Blocks incoming calls to your handset from callers who have blocked their Caller
ID.
Cisco SPA302D and SPA232D full user guide v1.0