Configuring Network Profiles; Network Profile Settings - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

For cisco unified communications manager 7.0(1)
Hide thumbs Also See for 7925G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Configuring Network Profiles

Configuring Network Profiles
You can configure up to four profiles for a phone to take advantage of WLAN environments. You can
add names to the profiles and enable one or more of the profiles for the phone to use. The Network
Profiles section of the web page displays the following information about each phone:
To display the Network Profiles list, access the web page for the phone as described in the
the Phone Web Page" section on page
For more information about configuring network profiles, see these sections:

Network Profile Settings

You can configure the settings for a profile by using this web page area. You can also modify or view
configured profiles from this web page area.
profile settings and provides references for more information.
To display Network Profile (1-4) Settings, access the web page for the phone as described in the
"Accessing the Phone Web Page" section on page
Table 4-3
Item
Wireless
Profile Name
SSID
Edit Profile
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
4-8
Configuring the Phone Book, page 4-29
Using System Settings, page 4-34
Profile—Displays a list of four configurable profiles.
Enabled—Indicates whether or not the profile is enabled.
Name—Lists the name for the profile.
SSID—Lists the SSID used by the profile.
Status—Indicates which profiles are active or inactive.
Configuring Wireless Settings in a Network Profile, page 4-12
Configuring Wireless LAN Security, page 4-13
Configuring IP Network Settings, page 4-23
Configuring the Alternate TFTP Server, page 4-24
Configuring Advanced Network Profile Settings, page 4-25
Basic Network Profile Settings
Description
Descriptive name for the profile.
Assigns the Service Set Identifier (SSID) to
this profile. You must assign the same SSID to
the phone that is also assigned to access points
in the wireless network.
Enables editing of the profile.
Chapter 4
Using the Cisco Unified Wireless IP Phone 7925G Web Pages
4-3, and then click the Network Profiles hyperlink.
Table 4-3
and
Table 4-4
4-3, and then click the Profile (1-4) hyperlink.
"Accessing
describe the basic and advanced
For More Information, See...
Associating to APs,
page 2-12
OL-15984-01

Advertisement

Table of Contents
loading

Table of Contents