Importing A Configuration Template; Upgrading Phone Firmware - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
•
•

Importing a Configuration Template

To import a phone configuration template, follow these steps:
Procedure
Connect the USB cable to an unconfigured phone and access the phone web page using the instructions
Step 1
on "Accessing the Phone Web Page" section on page
On the phone web page, choose the Backup Settings hyperlink.
Step 2
In the Import Configuration area of the page, enter the Encryption Key.
Step 3
You must enter the same key that you used to export the configuration template.
Note
Use the Browse button to locate the configuration template and click Open.
Step 4
The configuration file downloads to the phone.
You can use the web pages to add missing configuration items such as the username and password or
Step 5
make other changes at this time.
Related Topics
•
•
•
•

Upgrading Phone Firmware

You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using
the USB connection or by using the WLAN.
To display the Phone Upgrade area, access the web page for the phone as described in the
the Configuration Web Page for a Phone" section on page
hyperlink.
To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse
button to locate the firmware file on the network.
Related Topics
•
•
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
– IP address
Port
–
Modules and error level for collection
Preserving Logs (true/false)
Using System Settings, page 4-34
Viewing Trace Logs, page 4-34
Upgrading Phone Firmware, page 4-37
Changing the Admin Password, page 4-38
Using System Settings, page 4-34
Viewing Trace Logs, page 4-34
4-3.
4-5, and then click the Phone Upgrade
Using System Settings
"Accessing
4-37