Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual page 232

Configuring the Cisco Unified Wireless IP Phone 7925G in Cisco Unified Communications Manager
Table D-2 Checklist for Configuring the Cisco Unified Wireless IP Phone 7925G in Cisco Unified CallManager
Configuration Step and Purpose
Step 6 Assign line view speed-dial numbers (optional).
Adds line view speed-dial numbers.
Configuring and using line view speed-dial
Note
numbers are different from speed-dial hot keys
that are set up using the Phone Book feature and
stored locally on the wireless IP phone.
Users can change line view speed-dial settings
Note
on their phones by using Cisco Unified CM User
Options.
Step 7 Configure Cisco Unified IP Phone services and assign
services (optional).
Provides IP Phone services.
Users can add or change services on their
Note
phones by using the Cisco Unified CM User
Options.
Step 8 Add user information by configuring required fields.
Required fields are indicated by an asterisk (*); for
example, User ID and last name.
Note Assign a password (for User Options web pages)
and PIN (for Extension Mobility and Personal
Directory)
Adds user information to the global directory for Cisco
Unified Communications Manager.
Step 9
Associate a user to a user group.
Assigns users a common list of roles and permissions
that apply to all users in a user group. Administrators
can manage user groups, roles, and permissions to
control the level of access (and, therefore, the level of
security) for system users.
Applicable to Cisco Unified Communications
Note
Manager Administration Release 5.x and later.
Step 10 Associate a user with a phone. This step is optional if
you do not want users to have access to User Options.
Provides users with control over their phone such as
forwarding calls or adding line view speed-dial numbers
or services.
Some phones, such as those used by multiple
Note
users, do not have an associated user.
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
D-6
Appendix D Checklist for Deploying the Cisco Unified Wireless IP Phone 7925G
For More Information
Refer to Cisco Unified CallManager Administration
Guide, "Cisco Unified IP Phone Configuration"
chapter, "Configuring Speed-Dial Buttons" section.
Refer to Cisco Unified Wireless IP Phone7925G
Administration Guide for Cisco Unified
Communications Manager 4.3, 5.1, 6.0, 6.1(1) and
7.0(1), "Advanced Call Handling" chapter, "Speed
Dialing" section.
See Telephony Features Available for the Phone,
page 7-2
Refer to Cisco Unified CallManager Administration
Guide, "Cisco Unified IP Phone Services
Configuration" chapter.
See Setting Up Services, page
Refer to Cisco Unified CallManager Administration
Guide, "End User Configuration" chapter.
See Adding Users to Cisco Unified Communications
Manager, page 7-19.
Refer to the Cisco Unified Communications Manager
Administration Guide:
• "End User Configuration" chapter, "End User
Configuration settings" section
"User Group Configuration" chapter, "Adding
•
Users to a User Group" section
Refer to Cisco Unified CallManager Administration
Guide, "End User Configuration" chapter, "Associating
Devices to a User" section.
7-17.
OL-15984-01