Inserting Into An Output Channel - Yamaha CS1D Operating Manual

Inserting into an output channel

Here's how an external device can be inserted into an output channel (MIX channel, MATRIX channel, STEREO A/B
channel). Most of the steps are the same as for an input channel.
[Procedure]
1. In the LCD FUNCTION ACCESS block, press the
OUTPUT [PATCH] switch several times to access
the following INSERT PATCH screen (OUT PATCH
function).
LCD FUNCTION ACCESS
block
OUTPUT [PATCH] switch
INSERT PATCH screen (OUT PATCH function)
In this screen as in the INSERT PATCH screen of the
IN PATCH function, you can patch an output jack to
the insert out point in the left half of the screen, and
patch an input jack to the insert in point in the right
half of the screen.
2. In the left half of the screen, click the grid at which
the output jack connected to the external device
intersects with the desired output channel.
3. In the right half of the screen, click the grid at
which the input jack connected to the external
device intersects with the desired output channel.
Chapter 6. Insert and direct out
4. In the LCD FUNCTION ACCESS block, press the
OUTPUT [PATCH] switch several times to access
the following INSERT screen (OUT PATCH func-
tion).
In the INSERT POINT screen (OUT PATCH func-
tion) you can switch insertion on/off for each output
channel. Here you can also select the insert I/O point
(the position at which the external device is
inserted).
INSERT POINT screen (OUT PATCH function)
Hint
You can also access the INSERT screen (OUT PATCH
function) by clicking the INSERT tab in step 3.
5. Click the INS. button for the desired channel to
turn it on.
Insert will be enabled for the corresponding channel.
Hint
You can also turn insert on/off in the SELECTED
OUTPUT CHANNEL block.
6. Click one of the following buttons to select the
desired INSERT I/O POINT.
POST EQ............ Immediately after the EQ
PRE COMP ........ Immediately before the com-
pressor
PRE DELAY ....... Immediately before the delay
PRE FADER ....... Immediately before the fader
POST ON ........... Immediately after the [ON]
switch
89