Yamaha CS1D Operating Manual page 330

CS1D Reference Manual (Hardware)
2
3
4
5
1 CURSOR [ ]/[ ]/[
√
Use these to move the cursor in the display to the
desired parameter.
2 [DEC/CANCEL]/[INC/OK] switches
Use these to increment or decrement the value of the
parameter at which the cursor is located in the dis-
play.
When a confirmation window is displayed before
executing a Recall or Store operation, these switches
can also be used in place of the CANCEL button and
OK button in the window.
3 [SHIFT/GRAB] switch
If the cursor is located at a knob-type parameter with
a wide range of adjustment, the parameter value can
be made to change more quickly by holding down
this switch and pressing the [DEC/CANCEL]/[INC/
OK] switch or rotating the [DATA] encoder.
In some screens, you can hold down this screen and
press a CURSOR [ ]/[ ]/[
move the cursor from its current location to another
area.
The GRAB function is not supported on PM1D sys-
tem version 1.0.
4 [ENTER] switch
This switch is used as an on/off switch for the button
at which the cursor is located in the display.
100
1
]/[ ] switches
®
]/[ ] switch 1, to
√ ®
6
5 [DATA] encoder
This is used to continuously increase or decrease the
parameter value in the display where the cursor is
currently located.
6 Track pad and left/right switches
Use this to move the pointer in the display, and to
select a specific parameter.
When adjusting a parameter that has a wide range,
such as delay time, the parameter value will change
more rapidly if you click the right switch of the track
pad (mouse) while using the pad to modify the
value.
By holding down the left/right switches while you
turn on the power, you can initialize internal mem-
ory such as scene memory and the various libraries.
For details refer to "CS1D Reference Manual (Soft-
ware), Other" p.194.