Yamaha CS1D Operating Manual page 112

CS1D Operating Manual (Basic Operation)
2. Use the on-screen FIX/VARI buttons to select either
FIX type or VARI type for adjacent odd-numbered
even-numbered MIX buses.
When you switch between FIX type and VARI type,
the screen and signal flow will change as follows.
FIX type MIX buses
Input Input
channel 1 channel 1
MIX bus 1 MIX bus 2
ON/OFF buttons
These are on/off switches for the signal that is sent from the
input channel/ST IN channel to each MIX bus.
INPUT CHANNEL 1
FADER
PAN
ON
MIX1 (FIX)
MIX2 (FIX)
INPUT CHANNEL 2
FADER
PAN
ON
MIX1 (FIX)
MIX2 (FIX)
40
Input Input
channel 2 channel 2
MIX bus 1 MIX bus 2
......
......
ON
ON
ON
ON
VARI type MIX buses
Input Input
channel 1 channel 1
MIX bus 1 MIX bus 2
ON/OFF buttons PRE/POST buttons
These are on/off These buttons select
switches for the sig- either PRE or POST
nal that is sent from (post fader) as the send
the input channel/ point from which the
ST IN channel to signal will be sent from
each MIX bus. the input channel/ST IN
channel to each MIX
bus. If PRE is selected,
you can also use the
PRE FADER/PRE EQ
buttons to select either
pre-fader or pre-EQ.
INPUT CHANNEL 1
FADER
PAN
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
INPUT CHANNEL 2
FADER
PAN
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
Input Input
channel 2 channel 2
MIX bus 1 MIX bus 2
LEVEL knobs
These knobs
adjust the send
level of the signal
that is sent from
the input channel/
ST IN channel to
each MIX bus.
......
......
ON
ON
ON
ON