Yamaha CS1D Operating Manual page 324

CS1D Reference Manual (Hardware)
Hint
You can recall a specific channel to the SELECTED
INPUT CHANNEL block or SELECTED OUTPUT
CHANNEL block, or view a specific screen in the
display to verify the settings in detail.
Channels set to RECALL SAFE will be safe. However
even if FADE TIME is specified, it will have no effect,
and the fader will move immediately to the specified
value.
4. As desired, use the controls of the CS1D panel to
modify the settings.
If you operate the panel controls in PREVIEW mode,
the patch whose settings alone you loaded in step 3
will be modified.
The internal signal processing of the system will not
be affected.
5. If you wish to save the changes you made in step 4,
select the store destination as desired, and press the
SCENE MEMORY [STORE] switch.
The changes you made in step 4 will be stored to
memory.
6. To return the SCENE MEMORY block to NORMAL
mode, press the SCENE MEMORY [PREVIEW]
switch to make the switch LED go dark.
Directly recalling a scene
By using SCENE MEMORY [1]–[12] switches, you can
directly recall twelve scenes that were previously
assigned to these switches.
1. Assign scenes to the SCENE MEMORY [1]–[12]
switches.
Scenes can be assigned to the SCENE MEMORY [1]–
[12] switches in the SCENE function DIRECT
RECALL screen.
SCENE function DIRECT RECALL screen
In the SCENE function DIRECT RECALL screen,
click the DIRECT RECALL button.
94
DIRECT RECALL
button
The SCENE MEMORY block SCENE MEMORY
[RECALL] LED will light.
The SCENE MEMORY [1]–[12] switches will func-
tion as direct recall switches that directly recall the
specified twelve scenes.
Hint
The function of the SCENE MEMORY [1]–[12]
switches can be selected in the IN DCA/MUTE func-
tion MUTE GROUP ASSIGN screen, and also in the
OUT DCA/MUTE function MUTE GROUP
ASSIGN screen.
2. Press one of the SCENE MEMORY [1]–[12]
switches.
The LED of the corresponding switch will light, and
the scene assigned to that switch in step 1 will be
loaded.
Using mute groups
The SCENE MEMORY [1]–[12] switches can also be
used as mute master switches that turn muting on/off
for mute groups 1–12.
1. Assign input channels/output channels to mute
groups 1–12.
Input channels can be assigned to mute groups in the
IN DCA/MUTE function MUTE GROUP ASSIGN
screen. Output channels can be assigned to mute
groups in the OUT DCA/MUTE function MUTE
GROUP ASSIGN screen.
IN DCA/MUTE function MUTE GROUP ASSIGN
screen