Yamaha CS1D Operating Manual page 440

Output functions
[Procedure]
Copying EQ settings to an output channel
within the same tab (Example: copying from
MIX1 to MIX8)
1. Drag the mini-graph from the copy source output
channel and drop it onto the copy destination out-
put channel.
A window will appear, asking you to confirm the
copy. To execute the copy, click the OK button. To
cancel, click the CANCEL button.
2. Click the OK button, and the settings will be cop-
ied.
92
Copying EQ settings to an output channel
located in a different tab (Example: copying
from MIX19 to MIX44)
1. Drag the mini-graph from the copy source output
channel onto the tab of the copy destination.
Copying will not occur if you drop the mini-graph
onto any screen other than the MIX 1-24, MIX 25-
48, MATRIX 1-24, and STEREO A/B screens that
are displayed when you press the OUTPUT [EQ]
switch in the LCD FUNCTION ACCESS block of
the CS1D console.
2. The copy destination tab screen will appear.
3. Drag and drop the mini-graph onto the copy desti-
nation output channel.
A window will appear, asking you to confirm the
copy. To execute the copy, click the OK button. To
cancel, click the CANCEL button.
4. Click the OK button, and the settings will be cop-
ied.