Sub In - Yamaha CS1D Operating Manual

Output functions

SUB IN

[Function]
Make settings for the SUB IN signal that is sent from the input jacks of the input unit or the input jacks of the
CS1D directly to the MATRIX buses.
Console
In the LCD FUNCTION ACCESS
block, press the OUTPUT
[MATRIX/ST] switch (press repeat-
edly until the screen shown at the
right appears)
Display
MENU button OUTPUT
MATRIX/ST button SUB IN tab
[Screen functions]
1
2
3
1 SUB IN (L)/(R) SELECT
These buttons select the signal that will be patched to
the L channel/R channel of SUB IN.
When you click these buttons, a popup window will
appear in which you can select the signal.
You can choose from the L channel/R channel of 2TR
IN 1–6, and any input channel of an input unit (AI8,
DIO8).
110
4
5
2 SUB IN CUE
This button monitors the SUB IN signal that is
selected in 1.
If you move to another screen when the SUB IN CUE
button is on, it will automatically be turned off.
3 TO MATRIX ON/OFF (SUB IN
This button is an on/off switch for the signal that is
sent from SUB IN to the MATRIX bus.
When this button is off, the SUB IN signal will not be
sent to the MATRIX bus at all.
4 Send level
Specify the send level of the signal that is sent from
SUB IN to the MATRIX bus.
The knob that is displayed here will change accord-
ing to the pairing status of the send destination
MATRIX bus.
5 Pairing/send destination channel
This displays the number and short name of the send
destination MATRIX bus and its pairing status.
You can also click the heart symbol to set/defeat pair-
ing.
MATRIX on/off)