5.1ch Surround Speakers
The outputs for headphone amp, which are assigned to channels 11 and 12, connect the two Nuage
I/O outputs to the "TO PHONES" jack on the Nuage Master rear panel, which in turn connect to the
"PHONES" jacks on the lower front of the Nuage Master. There are two jacks, one quarter-inch and
one 3.5-mm, to accommodate headphones and in-ear earphones (both output L/R sound in stereo,
being connected to "TO HOST"). Note that headphone volume can be controlled by the headphone
amp's "LEVEL" knob; as a rule, you should set volume to an appropriate level beforehand as part of
control-room adjustments, discussed later on.
Nuage Master Rear
Nuage Master Front
Stereo Speakers
【Connection between Nuage I/O and output devices】
Headphone
【Headphone output connections】
48
Outboard gear
Video Deck
Nuage I/O Rear
Cue Sends
Headphones
Nuage I/O Rear
Earphone