Yamaha CS1D Operating Manual page 385

4 AUTO DISPLAY ON/OFF
These buttons specify whether or not the corre-
sponding screen will appear in the display when you
move a particular controller in the SELECTED
INPUT CHANNEL/SELECTED OUTPUT CHAN-
NEL block on the CS1D.
The controllers corresponding to each button and
the screens that appear are as follows.
Button Controller
INSERT/UNIT [INSERT] switch
button
UNIT-related controller HA/INSERT
EQ button ATT, EQ-related con-
trollers
GATE/COMP Gate/compressor-
button related controllers
DELAY button Delay-related control-
lers
ROUTING Routing-related con-
button trollers
FADER button Input/output channel
faders and [ON] switch
CUE/SOLO Input/output channel
button [CUE] switches
OSCILLATOR [OSC ON] switch,
button [OSC OUT] switch
These functions will not operate if a popup window
is displayed.
5 CONFIRMATION ON/OFF
This button specifies whether or not a confirmation
message will appear when you perform certain oper-
ations on the CS1D.
Each button corresponds to the following operations.
Button
PATCH button Patching changes in the OUT PATCH
screen/IN PATCH screen
RECALLING button Scene or library recall operations
STORING button Scene or library store operations
Even if the RECALLING button is turned on, the
scene will be recalled without a confirmation mes-
sage in the following cases.
4
5
6
Selected screen
INSERT/DIRECT
VIEW or
INSERT VIEW
EQ PARAMETER
GATE PRM /
COMP PRM
IN DELAY / OUT
DELAY
PAN/ROUTING /
MATRIX/ST or OUT
CH VIEW
IN CH VIEW / OUT
CH VIEW
IN CH VIEW / OUT
CH VIEW
OSCILLATOR
Operation
• Recall by MIDI program change
• Recall from the TC EVENT screen
• Direct recall
• Recall using a USER DEFINE switch
6 WARNING MESSAGES ON/OFF
These buttons specify whether or not a warning mes-
sage will appear if an error occurs in the connection
between the PM1D system and an external device.
Each button corresponds to the following errors.
Button
TC DROP A drop-out has occurred in the time code.
DIGITAL I/O A word clock that is not synchronized with the
PM1D system was input.
7
8
7 INTERNAL CALENDAR/CLOCK
These buttons set the year/month/day of the PM1D sys-
tem's internal calendar and the time of its internal clock.
Use the knobs to set the date or time, and press the SET
button to apply the new date and time.
On the included PC software, the SET switch has
no effect, and it is not possible to change the date or
time. (The internal calendar and clock settings of
the computer will be displayed.)
8 BATTERY
This displays the remaining amount of the internal
batteries for the console and engine A/B (DSP1D-EX
{DSP1D}.
When the battery runs down, the display will indi-
cate "EMPTY."
[Procedure]
Setting the date of the internal calendar or the
time of the internal clock
1. Access the UTILITY function PREFERENCE screen,
and use the six knobs of the INTERNAL CALEN-
DAR/CLOCK section to set the date and time.
2. To finalize the new date and time, click the SET button.
The instant you click the SET button, the new date
and time will take effect. If you click the CANCEL
button instead of the SET button, the date and time
will revert to the original settings.
UTILITY functions
Error
37