Yamaha CS1D Operating Manual page 448

Output functions
BEAT
Use the knob located below the numerical box to set
the BPM, and the delay time will be displayed as the
number of beats (quarter notes) for that tempo.
FRAME
The delay time will be displayed in frame units. You
can use the six buttons below the FRAME button to
select the number of frames per second.
The BPM (beat per minute) button of the DELAY
function is not related to the BPM button of the
internal effects.
2
3
4
5
2 GANG
This button links the DELAY parameters for adjacent
odd-numbered even-numbered output channels.
This can be set independently of pairing.
If the GANG button is turned on for channels that
are set to different delay times, rotating knob 3 will
cause the delay times of both channels to change
while preserving the difference between the two
times.
3 Knob
This knob sets the delay time for each channel.The
numerical box located below each knob shows the
delay time in the units selected in 1. Operating the
knobs will set the delay time in the units selected in
1. The numerical box located above each knob
always shows the settings in millisecond units.
4 DELAY ON/OFF
This button switches the delay on/off.
5 Pairing
This shows the output channel number and pairing
status. You can click the heart symbol to enable/
defeat pairing.
100