Effects Parameters; Reverb; Early Ref - Yamaha CS1D Operating Manual

Effects Parameters

These are the parameters used to edit each effect.

• REVERB

Parameter
Small Hall, Large Hall, Vocal Plate,
REVERB TYPE Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
REV TIME 0.3 - 99 [s]
INI.DELAY 0.0 - 500.0 [ms]
HI.RATIO 0.1 - 1.0
LO.RATIO 0.1 - 2.4
DIFFUSION 0 - 10
DENSITY 0 - 100 [%]
FREQ. 0.05 - 40.00 [Hz]
DEPTH 0 - 100 [%]
MOD DELAY 0.0 - 30.0 [ms]
ER. DELAY 0.0 - 100.0 [ms]
ER. BALANCE 0 - 100 [%]
GATE LEVEL OFF, –60 - 0 [dB]
ATTACK 0 - 120 [ms]
0.02ms - 1.96s(@fs=48kHz),
HOLD
0.02ms - 2.13s(@fs=44.1kHz)
5.0ms - 42.3s(@fs=48kHz),
DECAY
6.0ms - 46.0s(@fs=44.1kHz)
HPF Thru, 21 - 8.0k [Hz]
LPF 50 - 16.0k, Thru [Hz]
BALANCE WAT 0 - 100 [%]

• EARLY REF.

Parameter
Small Hall, Large Hall, Random,
ER. TYPE
Reverse, Plate, Spring
ROOM SIZE 0.1 - 20.0
LIVENESS 0 - 10
INI.DELAY 0.0 - 500.0 [ms]
DIFFUSION 0 - 10
DENSITY 0 - 100 [%]
ER. NUM. 1 - 34
FB.DELAY 0.0 - 1000.0 [ms]
FB.LEVEL –99 - +99 [%]
HI.RATIO 0.1 - 1.0
HPF Thru, 21 - 8.0k [Hz]
LPF 50 - 16.0k, Thru [Hz]
SPACE MOD 0 - 10
BALANCE WAT 0 - 100 [%]
[Type: STEREO]
Range
Reverb type
Reverb time
Initial delay before reverb begins
Reverb time for high-frequency portion
Reverb time for low-frequency portion
Reverb diffusion (left–right reverb spread)
Reverb density
Modulation frequency
Modulation depth
Delay time applied to modulation
Delay between early reflections and reverb
Balance of early reflections and reverb
(0%= ER., 100%= reverb)
Level at which gate kicks in
Gate opening speed
Gate open time
Gate closing speed
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Wet/dry balance
[Type: STEREO]
Range
Type of early reflection (ER.) simulation
Reflection spacing
Early reflections decay characteristics (0= dead, 10= live)
Initial delay before reverb begins
Reverb diffusion (left-right reverb spread)
Reverb density
Number of early reflections
Feedback delay time
Feedback gain
High-frequency feedback ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Modulation depth
Wet/dry balance
Effects Parameters
Description
Description
21