Basic Operation Of The Mix Output Block; Controls And Functions Of The Mix Output Block - Yamaha CS1D Operating Manual

Basic operation of the MIX OUTPUT block

This section explains basic operation of the MIX OUTPUT block.

Controls and functions of the MIX OUTPUT block

MIX [TO ST] switch and LED
This is an on/off switch for the signal that is
sent from the MIX channel to the STEREO bus.
MIX [ON] switch and LED
This is an on/off switch for the MIX channel.
If this switch is off, no signal will be sent to
the channel of the output unit that is
patched to the corresponding MIX channel.
MIX [PAIR] LED
This LED will light if the two adjacent odd-
numbered even-numbered MIX channels
have been paired.
MIX [LEVEL/BAL] encoder and LEDs
These encoders set the output level of MIX
channels 1–48.
[INS] LED
This LED will light if insertion is on for the
MIX channel.
MIX [NAME] indicator
This shows the short name of the MIX channel.
ON ON
PAIR
MIX [CUE] switch and LED
This switch monitors the currently
selected MIX channel.
Chapter 5. Basic operation for output channels
MIX [TO MTRX] switch and LED
This is an on/off switch for the signal that is
sent from the MIX channel to the MATRIX
buses. If this switch is off, no signal will be sent
from that MIX channel to any MATRIX bus.
MIX [DCA] switch and LEDs
This switch assigns each MIX channel to
DCA faders 9–12. When a MIX channel is
assigned to a DCA fader, the correspond-
ing LED will light.
SAFE [RCL] LED
This LED will light for MIX channels that are
set to Recall Safe (a condition in which the
channel is independent of scene recall
operations).
SAFE [MUTE] LED
This LED will light for MIX channels that are
set to Mute Safe (a condition in which the
channel is independent of mute group
operations).
MIX [SEL] switch and LED
This switch selects the MIX channel that
your operations will affect. The MIX [SEL]
LED of the currently selected MIX channel
will light.
61