Meter Functions; Make Meter-Related Settings; Input Metering - Yamaha CS1D Operating Manual

Global functions

METER functions

Make meter-related settings

Input metering

[Function]
Display the input levels of input channels 1–96 {1–48} and ST IN channels 1–8 {1–4}. The location (metering
point) at which the input levels are measured can also be selected.
Console
In the LCD FUNCTION ACCESS
block, press the [METER] switch
(press repeatedly until the screen
shown at the right appears)
Display
MENU button METER button
tab for the desired channel
[Screen functions]
1
2
1 Meters
These are peak level meters that show the input level
of each channel.
The current fader level is shown in the numerical box
located below.
The and CLIP meter will light if clipping occurs at
a metering point, PRE ATT, POST EQ, POST GATE,
POST COMP, or INSERT IN point in the currently
selected channel.
58
2 Pairing icon
This indicates the channel number and pairing sta-
tus.
By clicking this area, you can set/defeat pairing.