Yamaha CS1D Operating Manual page 8

Additions and changes in the SYS-
TEM CONNECTION screen
The following two additions/changes have been made to
the SYS/W.CLOCK function SYSTEM CONNECTION
screen.
1
2
1 Manual switching of the DIGITAL I/O connectors
You can now manually switch the number (1 or 2) of
the DIGITAL I/O connector that connects the con-
sole and engine.
To do so, click the button beside the number corre-
sponding to the DIGITAL I/O connector of the con-
sole or engine.
Click here
Even if you switch the number of the DIGITAL I/O
connector in the SYSTEM CONNECTION screen,
the previous connector will automatically be valid if
the appropriate signals are not being input from the
newly selected connector.
A switching popup window will appear, so press the
OK button to perform the switch.
2 Display PC connection status
The status of the connection between the console/
engine and the PC is now displayed in the PC CON-
NECTION section of the screen. The display has the
following significance.
PERMIT button
This button specifies whether to permit connec-
tion between the console/engine and the PC. When
this button is on, data transfer will be enabled
between the console/engine and PC whose serial
ports are connected to each other. For details refer
to the manual of the PC software "PM1D Manager
for Windows."
OFFLINE/ONLINE
This indicates the status of connections between
the console/engine and PC. When the serial ports
are connected to each other and data can be trans-
ferred, the ONLINE symbol will be displayed. If
data cannot be transferred even though the serial
ports are connected, the OFFLINE symbol will be
displayed.
Reference pages
Installation, pages 23, 26, 27
Software section, pages 44, 45, 46
7