Powering On The Printer; Holding Queues; Releasing Queues - Xerox DocuPrint 100 Operator's Manual

Managing the system

Powering on the printer

Holding queues

Releasing queues

3-2
1. Make sure the printer power cord is securely plugged into the
power receptacle, and the power button is pressed on.
2. Log on as the Administrator or Trusted User.
3. On the DocuSP Print Services window, select [Printer On]
from the Printer menu.
Before rebooting or powering off the system, hold all active
queues. A held queue does not release any jobs for printing, nor
accept any jobs that are sent to it.
On the Queue Manager window, do the following for each active
queue:
1. Right click the queue name.
2. From the Properties menu, select [Do Not Accept Jobs] or
[Do Not Release Jobs], as appropriate.
To hold all queues:
1. Right click in the queue list section, and select [Select All]
from the pop-up menu.
2. Right click again in the queue list section and select [Do Not
Accept Jobs].
3. Right click in the queue list section, and select [Do Not
Release Jobs].
After rebooting or powering on the system, release all held
queues.
On the Queue Manager window, do the following for each active
queue:
1. Right click the queue name.
2. From the pop-up menu, select [Accept Jobs] or [Release
Jobs], as appropriate.
To release all queues:
1. Right click in the queue list section, and select [Select All]
from the pop-up window.
Operator Guide