External Components And Options - Xerox DocuPrint 100 Operator's Manual

Keyboard
Mouse
Display monitor
Optional
processor
components
Operator Guide
• Back panel: The back panel of the processor has a power
receptacle and outlet, connectors, connector openings, and
ports.
The keyboard consists of alphanumeric keys similar to a
typewriter, symbols and special character keys, an extended
character set, and function keys. The keyboard is one of your
main methods of communicating with the printer. You can use
the keyboard to make selections, and to enter commands that
control functions such as requesting sample prints, or shutting
down the system.
The mouse is another main method of communicating with the
printer.
The LCD monitor allows you to interact with the printer and to
monitor its interaction with the various components. During a
print job, printer error messages may display to notify you of any
unexpected conditions.
The controller may be configured with any of the following
optional components:
• Connectivity board to enable Token Ring
• Channel interface board for channel connection to a host for
online LCDS printing
• One SCSI board to connect to an external tape drive
• Creator-3D series 3 graphics board (may replace the video
graphics board delivered with the controller)

External components and options

The following components are external to the processor. The
controller stand contains sections that may hold these
components.
• Quarter-inch cartridge (QIC) tape drive
• 36-track cartridge tape drive (optional)
• External 36 GB hard disk drive (optional)
NOTE: This additional drive is standard equipment on
systems with the NPS/IPS extension.
Overview
1-37