Xerox DocuPrint 100 Operator's Manual page 67

Using large paper
sizes in 3 pitch
mode
Operator Guide
The following figure illustrates the maximum and minimum paper
sizes supported in 8 pitch mode.
Figure 1-27. 8 pitch mode paper sizes
1. Maximum paper size for 8 pitch mode
2. Minimum paper size for 8 pitch mode
3. Travel direction of sheets out of paper tray
Large paper sizes with widths of 15.31 to 17 inches / 389 to 432
mm are supported only in 3 pitch mode and must feed short
edge first. These paper sizes slow down the throughput speed.
Therefore, a short edge feed job takes longer to print than a long
edge feed job.
NOTE: The system can support 14 by 17 inch / 356 by 432 mm,
20 pound or 80 gsm paper stock in 3 pitch mode. However,
printing performance is not guaranteed for all types of paper of
this size. Heavy (110 pound / 200 gsm) and light (16 pound / 60
gsm) weight papers can cause jams throughout the system, and
are not recommended.
Overview
1-47