Xerox DocuPrint 100 Operator's Manual page 180

Troubleshooting
5-54
Perform IPL on the tape drive again, using one of the following
procedure:
1. Turn off the tape drive by pressing the Power switch to OFF.
2. Wait 10 seconds and power the tape drive on by pressing the
Power switch to ON.
3. For the 36-track drive, press and hold the Select, Scroll, and
Ready buttons for at least five seconds.
a. Select button
b. Scroll button
c. Ready button
If the Initial Program Load procedure fails again, note the error
code and time, then call for service.
Operator Guide