Xerox DocuPrint 100 Operator's Manual page 30

Overview
Console window
1-10
• Help: Allows access to information on features, functions,
and procedures relating to the UNIX software that runs the
Sun workstation controller.
• DocuSP: Allows you to restart the system.
• Boot IPS/NPS: (Appears only if NPS/IPS Extension is
enabled.) Enables you to switch between EPS and NPS/IPS
print modes.
The Console window is a read-only text window that displays
system and error messages. It initially appears in the upper-left
corner of the screen. The following Console windows are
available:
• Solaris Console window: This window shows UNIX and
operating system messages. Typically, this window should
not be used. If you need to enter text, use a Terminal window.
If the Console window is closed, you can open it by selecting
Tools, then Terminal Console from the Workspace pop-up
menu. Each time you select Console, an additional Console
window displays. Messages and status information are
displayed on the Console window most recently opened;
messages do not display on all open Console windows.
NOTE: Opening multiple console windows is not
recommended, because it is easy to forget that you have
more than one window open, especially if you have reduced
them to icons. You could miss an important system message
if it was displayed on an earlier version of Console window.
Operator Guide