Crash Recovery; Streaming Mode - Xerox DocuPrint 100 Operator's Manual

Troubleshooting

Crash recovery

Streaming mode

5-16
• Problem: You are receiving PostScript error messages
while trying to merge variable data with the form.
Create the variable data file by using the Adobe driver.
This section explains how to recover a job after a system crash
or rollover, in Streaming and Spooling modes.
NOTE: In Streaming mode, the printing system begins
processing (decomposing and printing) the data stream as soon
as a minimum amount of data is received, and continues to
process the data as it is received. I
In Streaming mode, the printing system begins processing
(decomposing and printing) the data stream as soon as a
minimum amount of data is received, and continues to process
the data as it is received.
If the system crashes during the printing of an LCDS report, the
software tries to recover to a page boundary. If this recovery is
successful, you do not notice anything different with the output of
your recovered report, but you are asked to restart the system
after a crash. The recovered page may be offset from the rest of
the report if you specified ABNORMAL REPORT = YES for that
report. (For more information, refer to the Xerox DocuPrint EPS
Using LCDS Print Description Language).
If the system cannot completely recover an LCDS report (due to
data loss or missing online records) after a crash, it ends the job
and prints all remaining formatted reports. A message on the
screen notifies you that the job completed with errors.
Operator Guide