Troubleshooting Frequent Misfeeds (Processor Feeder Trays) - Xerox DocuPrint 100 Operator's Manual

Troubleshooting

Troubleshooting frequent misfeeds (processor feeder trays)

5-44
5. For the processor feeder trays, relatch the paper feeder
assembly by pressing the green dot until the assembly clicks
into place.
6. Slide the tray back into the printer until the tray latches and
press the Continue button to resume printing.
7. Discard any pages sent to the sample tray, purge tray, or
unused stacker bin when the misfeed was detected.
If the printer misfeeds frequently, the problem may be caused by
a glazed feed belt, especially if you notice that one tray feeds the
same paper better than another one does. (Glazing is caused by
a buildup of the chemicals found on most papers.)
If you suspect this is the problem, cleaning the feed belt may
eliminate the need to place a service call.
Operator Guide