Xerox DocuPrint 100 Operator's Manual page 159

Using the pinch
lever to access
area 9
Operator Guide
To use the pinch lever located inside area 9:
This area of the printer may be hot. Be careful when inserting
your hand.
1. Locate the green pinch lever directly behind area 9 (above
the green knob and further inside area 9).
2. Carefully reaching your hand into the area, squeeze the
edges of the pinch lever and lift it up.
3. Remove any paper caught in this area.
4. Turn the green pinch lever to its original position. Make sure
that you relatch the lever after you have cleared any paper in
this area.
CAUTION
Troubleshooting
5-33